![]() You should see something like this when checking the status. If it doesn’t start (mine didn’t), a quick reboot will solve the problem. Now, start the driver service (this is the same as running upsdrvctl start) and check the status. The friendly name (e.g., cyberpower1) must be one word, no spaces. Edit the configuration file at /etc/nut/ups.conf and add the following information at the bottom. Over on NUT’s compatibility database, you can see which driver to use for the CP1500PFCLCD (in my case, it was usbhid-ups). sudo apt-get update & sudo apt-get install nut nut-client nut-server Just a warning, the systemd service will fail to start until we make a configuration file. With this configuration, the master shuts down last, giving the slaves time to shutdown first.įirst, connect your UPS to your Raspberry Pi via the included USB cable. However, you can setup a more advanced configuration consisting of a “master” computer that runs the driver, server, and client, but also have clients running on one or more separate “slave” computers. It consists of one UPS and one computer which runs the driver, server, and client. In my case, I’m using the “simple” configuration, also known as standalone. The NUT suite offers a variety of configurations.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |